Max Quat 10% Sanitizer

Max Quat 10% Sanitizer () has demonstrated effectiveness against viruses similar to 2019 novel coronavirus (SARS-CoV-2) on hard, non-porous surfaces. Therefore, this product can be used against SARS-CoV-2, the novel coronavirus that causes the disease COVID-19, when used in accordance with the directions for use against Adenovirus Type 5 on hard, non-porous surfaces. Highly concentrated formula! USDA Food Grade approved by the NSF and is an approved EPA disinfectant.

 Refer to the CDC website below for additional information:
https://www.cdc.gov/coronavirus/2019-ncov/index.html

Refer to the EPA site with EPA Reg #1839-86-61247

https://www.epa.gov/pesticide-registration/list-n-disinfectants-coronavirus-covid-19

 Mixing Directions for Sanitization

 For Direct Application and Max Strength:

    1 ounce to 2 gallons

    5 ounce to 5 gallons

    1 cup (8 ounces) to 16 gallons

    4 1/8 cups (25 ounces) to 50 gallons

    4 ½ cups (28 ounces) to 55 gallons

 For use with a down stream injector at 20:1

 Put 6 ¼ cups in a 5 gallon container of water.  Fill the remaining 5 gallons container with water.  This mix is ready to be applied with a downstream injector at a 20:1 ratio.

For use with a down stream injector at 30:1

Put 9 ½ cups in a 5 gallon container of water.  Fill the remaining 5 gallons container with water.  This mix is ready to be applied with a downstream injector at a 30:1 ratio.